{
  "material": "CPVC",
  "nominal_size": null,
  "sizing_system": null,
  "actual_od_requirement": null,
  "schedule": null,
  "finished_length": {
    "value": 6,
    "unit": "in"
  },
  "required_tolerance": null,
  "end_a": null,
  "end_b": null,
  "quantity": null,
  "in_research_scope": true,
  "clarifications": [
    "Confirm what “half-inch” means: a nominal designation or an actual measured dimension. If nominal, confirm IPS or CTS. Reference half-inch IPS Schedule 80 OD is 0.840 inch; CTS CPVC SDR 11 OD is 0.625 inch. Do not assume either interpretation or system.",
    "Confirm the schedule or tubing series and product specification.",
    "Is six inches the finished end-to-end length after end treatments?",
    "Which end or ends require threads? Confirm designation and acceptance criteria; Do not cut NPT threads on CTS tubing.",
    "What treatment is required on any plain end?",
    "How many pieces and what finished-length tolerance?",
    "Ask for conveyed substance, concentration, operating temperature and pressure; no material is selected from a vague application label.",
    "Schema success records structure only, not completeness, suitability or manufacturability."
  ],
  "source_refs": [
    "https://www.gfps.com/content/dam/gfps/us/other/archive/gfps-us-brochure-Vinyl-Catalog-and-Tech-Information-2024-en.pdf",
    "https://store.astm.org/d2846_d2846m-24.html",
    "https://www.spearsmfg.com/super_sourcebook/SSB-1%20Part%202%20Technical%20Information%20Catalog/082%20CPVC%20CTS%20Pipe,%20Fittings%20&%20Valves%20Design%20&%20Installation.pdf"
  ],
  "original_request": "I need half-inch CPVC, cut to six inches and threaded.",
  "sdr": null,
  "application": null
}
