# Recorded pipe specification

V2 (fact-checked from V1)

Validates the structure of a recorded request only. Passing does not establish dimensional consistency, compatibility, threadability, completeness, pressure rating or manufacturability. Preserve contradictory requests and clarify them, never silently correct them. Null means not supplied. Flag CPVC + CTS + Schedule 80 + male NPT while preserving all four requested values.

## An incomplete half-inch CPVC request

Request: I need half-inch CPVC, cut to six inches and threaded.

```json
{
  "material": "CPVC",
  "nominal_size": null,
  "sizing_system": null,
  "actual_od_requirement": null,
  "schedule": null,
  "finished_length": {
    "value": 6,
    "unit": "in"
  },
  "required_tolerance": null,
  "end_a": null,
  "end_b": null,
  "quantity": null,
  "in_research_scope": true,
  "clarifications": [
    "Confirm what “half-inch” means: a nominal designation or an actual measured dimension. If nominal, confirm IPS or CTS. Reference half-inch IPS Schedule 80 OD is 0.840 inch; CTS CPVC SDR 11 OD is 0.625 inch. Do not assume either interpretation or system.",
    "Confirm the schedule or tubing series and product specification.",
    "Is six inches the finished end-to-end length after end treatments?",
    "Which end or ends require threads? Confirm designation and acceptance criteria; Do not cut NPT threads on CTS tubing.",
    "What treatment is required on any plain end?",
    "How many pieces and what finished-length tolerance?",
    "Ask for conveyed substance, concentration, operating temperature and pressure; no material is selected from a vague application label.",
    "Schema success records structure only, not completeness, suitability or manufacturability."
  ],
  "source_refs": [
    "https://www.gfps.com/content/dam/gfps/us/other/archive/gfps-us-brochure-Vinyl-Catalog-and-Tech-Information-2024-en.pdf",
    "https://store.astm.org/d2846_d2846m-24.html",
    "https://www.spearsmfg.com/super_sourcebook/SSB-1%20Part%202%20Technical%20Information%20Catalog/082%20CPVC%20CTS%20Pipe,%20Fittings%20&%20Valves%20Design%20&%20Installation.pdf"
  ],
  "original_request": "I need half-inch CPVC, cut to six inches and threaded.",
  "sdr": null,
  "application": null
}
```
