{
  "plain-pipe.svg": {
    "meaning": "Plain-end pipe. End A (left) is square-cut at 90 degrees; end B (right) is chamfered. Neither end is threaded.",
    "labels": [
      "Square cut",
      "Chamfered"
    ],
    "specification_context": "Material, nominal size, sizing system and schedule must be stated in a real request; no unspecified stock is assumed. Unless dimensioned above, overall length and length tolerance are unspecified. End A is the left end and end B the right end in side views; they must be specified independently. Quantity is unspecified. Clarify missing dimensions, units, thread designation and acceptance requirements, chamfer angle and explicitly identified axial extent or radial removal, required tolerance, product documents and intended use.",
    "download_url": "/agent-v2/diagrams/plain-pipe.svg",
    "download_description": "Downloadable SVG image: Plain-end pipe. End A (left) is square-cut at 90 degrees; end B (right) is chamfered. Neither end is threaded."
  },
  "toe.svg": {
    "meaning": "TOE: threaded one end. End A (left) has external tapered threads; end B (right) is plain with a chamfer. The plain end could instead be square-cut if requested. TOE is an ordering convention, not an ASTM term.",
    "labels": [
      "Threaded",
      "Unthreaded"
    ],
    "specification_context": "Material, nominal size, sizing system and schedule must be stated in a real request; no unspecified stock is assumed. Unless dimensioned above, overall length and length tolerance are unspecified. End A is the left end and end B the right end in side views; they must be specified independently. Quantity is unspecified. Clarify missing dimensions, units, thread designation and acceptance requirements, chamfer angle and explicitly identified axial extent or radial removal, required tolerance, product documents and intended use.",
    "download_url": "/agent-v2/diagrams/toe.svg",
    "download_description": "Downloadable SVG image: TOE: threaded one end. End A (left) has external tapered threads; end B (right) is plain with a chamfer. The plain end could instead be square-cut if requested. TOE is an ordering convention, not an ASTM term."
  },
  "nipple.svg": {
    "meaning": "TBE nipple: threaded both ends. End A (left) and end B (right) each have male tapered threads. Specify each thread designation independently. TBE is an ordering convention, not an ASTM term.",
    "labels": [
      "Threaded",
      "Threaded"
    ],
    "specification_context": "Material, nominal size, sizing system and schedule must be stated in a real request; no unspecified stock is assumed. Unless dimensioned above, overall length and length tolerance are unspecified. End A is the left end and end B the right end in side views; they must be specified independently. Quantity is unspecified. Clarify missing dimensions, units, thread designation and acceptance requirements, chamfer angle and explicitly identified axial extent or radial removal, required tolerance, product documents and intended use.",
    "download_url": "/agent-v2/diagrams/nipple.svg",
    "download_description": "Downloadable SVG image: TBE nipple: threaded both ends. End A (left) and end B (right) each have male tapered threads. Specify each thread designation independently. TBE is an ordering convention, not an ASTM term."
  },
  "close-nipple.svg": {
    "meaning": "Close nipple: end A and end B are externally threaded with almost no plain pipe between the threaded sections. This drawing supplies no minimum manufacturable length.",
    "labels": [
      "Almost no plain pipe between threads"
    ],
    "specification_context": "Material, nominal size, sizing system and schedule must be stated in a real request; no unspecified stock is assumed. Unless dimensioned above, overall length and length tolerance are unspecified. End A is the left end and end B the right end in side views; they must be specified independently. Quantity is unspecified. Clarify missing dimensions, units, thread designation and acceptance requirements, chamfer angle and explicitly identified axial extent or radial removal, required tolerance, product documents and intended use.",
    "download_url": "/agent-v2/diagrams/close-nipple.svg",
    "download_description": "Downloadable SVG image: Close nipple: end A and end B are externally threaded with almost no plain pipe between the threaded sections. This drawing supplies no minimum manufacturable length."
  },
  "square-cut.svg": {
    "meaning": "Lengthwise front-half cutaway of a hollow pipe, viewed straight on. Hatched upper and lower sections are the cut walls; the tinted middle is the visible back wall. The right side remains whole, separated by a zigzag cutaway boundary. The left end face is perpendicular to the axis: 90 degrees. It conveys shape, not a squareness tolerance.",
    "labels": [
      "Front half cut away",
      "Whole pipe",
      "Square cut · straight end",
      "90°"
    ],
    "specification_context": "Material, nominal size, sizing system and schedule must be stated in a real request; no unspecified stock is assumed. Unless dimensioned above, overall length and length tolerance are unspecified. End A is the left end and end B the right end in side views; they must be specified independently. Quantity is unspecified. Clarify missing dimensions, units, thread designation and acceptance requirements, chamfer angle and explicitly identified axial extent or radial removal, required tolerance, product documents and intended use.",
    "download_url": "/agent-v2/diagrams/square-cut.svg",
    "download_description": "Downloadable SVG image: Lengthwise front-half cutaway of a hollow pipe, viewed straight on. Hatched upper and lower sections are the cut walls; the tinted middle is the visible back wall. The right side remains whole, separated by a zigzag cutaway boundary. The left end face is perpendicular to the axis: 90 degrees. It conveys shape, not a squareness tolerance."
  },
  "chamfer.svg": {
    "meaning": "Lengthwise front-half cutaway of a hollow pipe, viewed straight on. Upper and lower cut walls, tinted back wall, and the whole right portion joined at a zigzag make the hollow shape visible. The outside corners at the left end are beveled. The bevel is exaggerated for clarity; no chamfer angle, depth or length is dimensioned.  \n\nRule: Follow the selected manufacturer’s product- and size-specific end-preparation instructions.\n\nSource example: IPEX S12, printed pages 47 and 51 (PDF pages 56 and 60), shows a 10–15 degree OD bevel with approximately 3/32 inch (0.09375 inch) AXIAL EXTENT, measured along the pipe axis, not radial depth. The accompanying instructions address pressure pipe 2 inches and above.\n\nLimitations: Do not assign this geometry by default to the ½-inch or ¾-inch examples. Confirm achievable chamfer dimensions with the selected manufacturer or fabricator. The undimensioned chamfer drawing illustrates shape only.",
    "labels": [
      "Front half cut away",
      "Whole pipe",
      "Chamfer · sloped outside edge",
      "Chamfer enlarged for clarity"
    ],
    "specification_context": "Material, nominal size, sizing system and schedule must be stated in a real request; no unspecified stock is assumed. Unless dimensioned above, overall length and length tolerance are unspecified. End A is the left end and end B the right end in side views; they must be specified independently. Quantity is unspecified. Clarify missing dimensions, units, thread designation and acceptance requirements, chamfer angle and explicitly identified axial extent or radial removal, required tolerance, product documents and intended use.",
    "download_url": "/agent-v2/diagrams/chamfer.svg",
    "download_description": "Downloadable SVG image: Lengthwise front-half cutaway of a hollow pipe, viewed straight on. Upper and lower cut walls, tinted back wall, and the whole right portion joined at a zigzag make the hollow shape visible. The outside corners at the left end are beveled. The bevel is exaggerated for clarity; no chamfer angle, depth or length is dimensioned.  \n\nRule: Follow the selected manufacturer’s product- and size-specific end-preparation instructions.\n\nSource example: IPEX S12, printed pages 47 and 51 (PDF pages 56 and 60), shows a 10–15 degree OD bevel with approximately 3/32 inch (0.09375 inch) AXIAL EXTENT, measured along the pipe axis, not radial depth. The accompanying instructions address pressure pipe 2 inches and above.\n\nLimitations: Do not assign this geometry by default to the ½-inch or ¾-inch examples. Confirm achievable chamfer dimensions with the selected manufacturer or fabricator. The undimensioned chamfer drawing illustrates shape only."
  },
  "npt-thread.svg": {
    "meaning": "Close-up of male (external) tapered pipe threads. The outside profile has a slight taper and an illustrative lead-in edge. The label ½–14 NPT means a half-inch nominal thread designation with 14 threads per inch. It does not specify a pipe measured 0.500 inch across. No thread length or acceptance gauge is supplied by this illustration. \n\nRule: GF Harvel S1 specifies a 50% reduction of the manufacturer’s plain-end water-service pressure rating at 73°F when cutting threads into suitable Schedule 80-or-heavier PVC/CPVC IPS pipe.\n\nReference examples: ½-inch Schedule 80 is 850 × 0.50 = 425 psi; ¾-inch Schedule 80 is 690 × 0.50 = 345 psi, before other applicable reductions. These reference calculations do not establish a finished component or system rating.\n\nLimitations: Confirm manufacturer, product, temperature, conveyed substance, concentration, operating pressure and connection limitations. This rule does not apply universally to every plastic or to molded threaded fittings. Cut threads only on suitable Schedule 80 or heavier IPS pipe; do not cut NPT threads on Schedule 40 or CTS tubing. Specify ASME B1.20.1 / ASTM F1498 dimensions and gaging; F1498 is not pressure certification.",
    "labels": [
      "External threads",
      "Slight taper",
      "Lead-in edge",
      "½–14 NPT"
    ],
    "specification_context": "Material, nominal size, sizing system and schedule must be stated in a real request; no unspecified stock is assumed. Unless dimensioned above, overall length and length tolerance are unspecified. End A is the left end and end B the right end in side views; they must be specified independently. Quantity is unspecified. Clarify missing dimensions, units, thread designation and acceptance requirements, chamfer angle and explicitly identified axial extent or radial removal, required tolerance, product documents and intended use.",
    "download_url": "/agent-v2/diagrams/npt-thread.svg",
    "download_description": "Downloadable SVG image: Close-up of male (external) tapered pipe threads. The outside profile has a slight taper and an illustrative lead-in edge. The label ½–14 NPT means a half-inch nominal thread designation with 14 threads per inch. It does not specify a pipe measured 0.500 inch across. No thread length or acceptance gauge is supplied by this illustration. \n\nRule: GF Harvel S1 specifies a 50% reduction of the manufacturer’s plain-end water-service pressure rating at 73°F when cutting threads into suitable Schedule 80-or-heavier PVC/CPVC IPS pipe.\n\nReference examples: ½-inch Schedule 80 is 850 × 0.50 = 425 psi; ¾-inch Schedule 80 is 690 × 0.50 = 345 psi, before other applicable reductions. These reference calculations do not establish a finished component or system rating.\n\nLimitations: Confirm manufacturer, product, temperature, conveyed substance, concentration, operating pressure and connection limitations. This rule does not apply universally to every plastic or to molded threaded fittings. Cut threads only on suitable Schedule 80 or heavier IPS pipe; do not cut NPT threads on Schedule 40 or CTS tubing. Specify ASME B1.20.1 / ASTM F1498 dimensions and gaging; F1498 is not pressure certification."
  },
  "finished-length.svg": {
    "meaning": "Finished pipe length is 6 inches, measured from the leftmost complete end to the rightmost complete end, including threaded and chamfered portions. Start here and Finish here identify those two endpoints. Exterior arrows touch the endpoints from outside. This is not insertion depth or exposed installed length.",
    "labels": [
      "6″ end to end",
      "Start here",
      "Finish here"
    ],
    "specification_context": "Material, nominal size, sizing system and schedule must be stated in a real request; no unspecified stock is assumed. Unless dimensioned above, overall length and length tolerance are unspecified. End A is the left end and end B the right end in side views; they must be specified independently. Quantity is unspecified. Clarify missing dimensions, units, thread designation and acceptance requirements, chamfer angle and explicitly identified axial extent or radial removal, required tolerance, product documents and intended use.",
    "download_url": "/agent-v2/diagrams/finished-length.svg",
    "download_description": "Downloadable SVG image: Finished pipe length is 6 inches, measured from the leftmost complete end to the rightmost complete end, including threaded and chamfered portions. Start here and Finish here identify those two endpoints. Exterior arrows touch the endpoints from outside. This is not insertion depth or exposed installed length."
  },
  "tolerance.svg": {
    "meaning": "Requested finished length: 6 inches (6.000 inches). With an illustrative ±1/32 inch tolerance (±0.03125 inch), shortest allowed is 5 31/32 inches (exactly 5.96875 inches; diagram rounds to approximately 5.969). Longest allowed is 6 1/32 inches (exactly 6.03125 inches; diagram rounds to approximately 6.031). The dashed line marks the endpoint at the requested 6-inch length; the gray band marks allowable variation. Differences are exaggerated. This arithmetic example defines a requested tolerance; confirm that the selected process can meet it.",
    "labels": [
      "±1/32″",
      "6.000″",
      "Requested · 6″",
      "≈ 5.969″",
      "Shortest allowed · 5 31/32″",
      "≈ 6.031″",
      "Longest allowed · 6 1/32″",
      "Your requested length: 6″"
    ],
    "specification_context": "Material, nominal size, sizing system and schedule must be stated in a real request; no unspecified stock is assumed. Unless dimensioned above, overall length and length tolerance are unspecified. End A is the left end and end B the right end in side views; they must be specified independently. Quantity is unspecified. Clarify missing dimensions, units, thread designation and acceptance requirements, chamfer angle and explicitly identified axial extent or radial removal, required tolerance, product documents and intended use.",
    "download_url": "/agent-v2/diagrams/tolerance.svg",
    "download_description": "Downloadable SVG image: Requested finished length: 6 inches (6.000 inches). With an illustrative ±1/32 inch tolerance (±0.03125 inch), shortest allowed is 5 31/32 inches (exactly 5.96875 inches; diagram rounds to approximately 5.969). Longest allowed is 6 1/32 inches (exactly 6.03125 inches; diagram rounds to approximately 6.031). The dashed line marks the endpoint at the requested 6-inch length; the gray band marks allowable variation. Differences are exaggerated. This arithmetic example defines a requested tolerance; confirm that the selected process can meet it."
  },
  "schedule-80.svg": {
    "meaning": "½-inch nominal IPS Schedule 80 reference cross section. Outside diameter (OD): 0.840 inch. Wall thickness: a minimum of 0.147 inch. Published average inside diameter (ID): 0.526 inch. GF Harvel S1 published average ID; actual bore varies. Minimum wall is a separate reference, not the wall inferred from the average bore.",
    "labels": [
      "½″ · Schedule 80",
      "Outer diameter (OD)",
      "0.840″",
      "0.526″",
      "Average ID*",
      "Wall thickness:",
      "a minimum of 0.147″",
      "* Published average ID · actual bore varies"
    ],
    "specification_context": "Material, nominal size, sizing system and schedule must be stated in a real request; no unspecified stock is assumed. Unless dimensioned above, overall length and length tolerance are unspecified. End A is the left end and end B the right end in side views; they must be specified independently. Quantity is unspecified. Clarify missing dimensions, units, thread designation and acceptance requirements, chamfer angle and explicitly identified axial extent or radial removal, required tolerance, product documents and intended use.",
    "source_refs": [
      "https://www.gfps.com/content/dam/gfps/us/other/archive/gfps-us-brochure-Vinyl-Catalog-and-Tech-Information-2024-en.pdf"
    ],
    "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" width=\"360\" height=\"415\" viewBox=\"0 0 360 415\" role=\"img\" aria-labelledby=\"title desc\"><title id=\"title\">Half-inch Schedule 80 pipe</title><desc id=\"desc\">Outer diameter 0.840 inches. Published average inside diameter 0.526 inches. Wall thickness: a minimum of 0.147 inches.</desc><defs><marker id=\"tip\" viewBox=\"0 0 10 10\" refX=\"10\" refY=\"5\" markerWidth=\"7\" markerHeight=\"7\" orient=\"auto\"><path d=\"M0 0L10 5L0 10Z\" fill=\"#20399a\"/></marker><pattern id=\"wall\" width=\"7\" height=\"7\" patternUnits=\"userSpaceOnUse\" patternTransform=\"rotate(45)\"><path d=\"M0 0V7\" stroke=\"#9aa0a8\" stroke-width=\".7\"/></pattern><clipPath id=\"detail\"><rect x=\"24\" y=\"50\" width=\"432\" height=\"170\"/></clipPath></defs><rect width=\"360\" height=\"415\" fill=\"white\"/><g font-family=\"Arial, sans-serif\" font-size=\"18\" fill=\"#262a30\"><text x=\"180\" y=\"32\" text-anchor=\"middle\" font-size=\"25\" font-weight=\"600\">½″ · Schedule 80</text><circle cx=\"180\" cy=\"218\" r=\"75.6\" fill=\"url(#wall)\" stroke=\"#262a30\" stroke-width=\"1.5\"/><circle cx=\"180\" cy=\"218\" r=\"47.34\" fill=\"white\" stroke=\"#262a30\" stroke-width=\"1.5\"/><text x=\"180\" y=\"68\" text-anchor=\"middle\" fill=\"#616771\" font-size=\"18\">Outer diameter (OD)</text><line x1=\"104.4\" y1=\"137.4\" x2=\"104.4\" y2=\"101\" stroke=\"#20399a\" stroke-width=\"1\"/><line x1=\"255.6\" y1=\"137.4\" x2=\"255.6\" y2=\"101\" stroke=\"#20399a\" stroke-width=\"1\"/><line x1=\"104.4\" y1=\"111\" x2=\"255.6\" y2=\"111\" stroke=\"#20399a\" stroke-width=\"1\"/><line x1=\"86.4\" y1=\"111\" x2=\"104.4\" y2=\"111\" stroke=\"#20399a\" stroke-width=\"1\" marker-end=\"url(#tip)\"/><line x1=\"273.6\" y1=\"111\" x2=\"255.6\" y2=\"111\" stroke=\"#20399a\" stroke-width=\"1\" marker-end=\"url(#tip)\"/><text x=\"180\" y=\"99\" text-anchor=\"middle\" fill=\"#20399a\" font-size=\"22\">0.840″</text><line x1=\"132.66\" y1=\"218\" x2=\"227.34\" y2=\"218\" stroke=\"#20399a\" stroke-width=\"1\"/><line x1=\"148.86\" y1=\"218\" x2=\"132.66\" y2=\"218\" stroke=\"#20399a\" stroke-width=\"1\" marker-end=\"url(#tip)\"/><line x1=\"211.14\" y1=\"218\" x2=\"227.34\" y2=\"218\" stroke=\"#20399a\" stroke-width=\"1\" marker-end=\"url(#tip)\"/><text x=\"180\" y=\"200\" text-anchor=\"middle\" fill=\"#20399a\" font-size=\"22\">0.526″</text><text x=\"180\" y=\"245\" text-anchor=\"middle\" fill=\"#616771\" font-size=\"17\">ID*</text><path d=\"M284 329V282.10224994260494L224.10224994260497 262.10224994260494\" stroke=\"#20399a\" stroke-width=\"1\" fill=\"none\" marker-end=\"url(#tip)\"/><text x=\"180\" y=\"345\" text-anchor=\"middle\" font-size=\"17\">Wall thickness:</text><text x=\"180\" y=\"369\" text-anchor=\"middle\" font-size=\"19\">a minimum of 0.147″</text><text x=\"180\" y=\"405\" text-anchor=\"middle\" font-size=\"15\" fill=\"#616771\">* Published average ID · actual bore varies</text></g></svg>",
    "download_url": "/agent-v2/diagrams/schedule-80.svg",
    "download_description": "Downloadable SVG image: ½-inch nominal IPS Schedule 80 reference cross section. Outside diameter (OD): 0.840 inch. Wall thickness: a minimum of 0.147 inch. Published average inside diameter (ID): 0.526 inch. GF Harvel S1 published average ID; actual bore varies. Minimum wall is a separate reference, not the wall inferred from the average bore."
  },
  "size-comparison.svg": {
    "meaning": "Two IPS Schedule 80 reference cross sections drawn at the same scale. Left: ½-inch nominal, outside diameter (OD) 0.840 inch, minimum wall thickness 0.147 inch, published average inside diameter (ID) 0.526 inch. Right: ¾-inch nominal, OD 1.050 inches, minimum wall thickness 0.154 inch, published average ID 0.722 inch. GF Harvel S1 reports published average ID and minimum wall as separate catalog values. Do not derive average ID from OD minus twice minimum wall; actual bore varies. The catalog reports these dimensions for both PVC and CPVC Schedule 80 products, not CTS tubing.",
    "labels": [
      "½″ · Schedule 80",
      "Outer diameter (OD)",
      "0.840″",
      "0.526″",
      "Average ID*",
      "Wall thickness:",
      "a minimum of 0.147″",
      "¾″ · Schedule 80",
      "Outer diameter (OD)",
      "1.050″",
      "0.722″",
      "Average ID*",
      "Wall thickness:",
      "a minimum of 0.154″",
      "* Published average inside diameter · actual bore varies"
    ],
    "specification_context": "Material, nominal size, sizing system and schedule must be stated in a real request; no unspecified stock is assumed. Unless dimensioned above, overall length and length tolerance are unspecified. End A is the left end and end B the right end in side views; they must be specified independently. Quantity is unspecified. Clarify missing dimensions, units, thread designation and acceptance requirements, chamfer angle and explicitly identified axial extent or radial removal, required tolerance, product documents and intended use.",
    "source_refs": [
      "https://www.gfps.com/content/dam/gfps/us/other/archive/gfps-us-brochure-Vinyl-Catalog-and-Tech-Information-2024-en.pdf"
    ],
    "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" width=\"720\" height=\"415\" viewBox=\"0 0 720 415\" role=\"img\" aria-labelledby=\"title desc\"><title id=\"title\">Half-inch versus three-quarter-inch Schedule 80</title><desc id=\"desc\">Half-inch versus three-quarter-inch Schedule 80. Rings use the same scale. Published average ID · actual bore varies from published outside diameter and minimum wall, not a measured bore.</desc><defs><marker id=\"tip\" viewBox=\"0 0 10 10\" refX=\"10\" refY=\"5\" markerWidth=\"7\" markerHeight=\"7\" orient=\"auto\"><path d=\"M0 0L10 5L0 10Z\" fill=\"#20399a\"/></marker><pattern id=\"wall\" width=\"7\" height=\"7\" patternUnits=\"userSpaceOnUse\" patternTransform=\"rotate(45)\"><path d=\"M0 0V7\" stroke=\"#9aa0a8\" stroke-width=\".7\"/></pattern><clipPath id=\"detail\"><rect x=\"24\" y=\"50\" width=\"432\" height=\"170\"/></clipPath></defs><rect width=\"720\" height=\"415\" fill=\"white\"/><g font-family=\"Arial, sans-serif\" font-size=\"18\" fill=\"#262a30\"><text x=\"180\" y=\"32\" text-anchor=\"middle\" font-size=\"25\" font-weight=\"600\">½″ · Schedule 80</text><circle cx=\"180\" cy=\"218\" r=\"75.6\" fill=\"url(#wall)\" stroke=\"#262a30\" stroke-width=\"1.5\"/><circle cx=\"180\" cy=\"218\" r=\"47.34\" fill=\"white\" stroke=\"#262a30\" stroke-width=\"1.5\"/><text x=\"180\" y=\"68\" text-anchor=\"middle\" fill=\"#616771\" font-size=\"18\">Outer diameter (OD)</text><line x1=\"104.4\" y1=\"137.4\" x2=\"104.4\" y2=\"101\" stroke=\"#20399a\" stroke-width=\"1\"/><line x1=\"255.6\" y1=\"137.4\" x2=\"255.6\" y2=\"101\" stroke=\"#20399a\" stroke-width=\"1\"/><line x1=\"104.4\" y1=\"111\" x2=\"255.6\" y2=\"111\" stroke=\"#20399a\" stroke-width=\"1\"/><line x1=\"86.4\" y1=\"111\" x2=\"104.4\" y2=\"111\" stroke=\"#20399a\" stroke-width=\"1\" marker-end=\"url(#tip)\"/><line x1=\"273.6\" y1=\"111\" x2=\"255.6\" y2=\"111\" stroke=\"#20399a\" stroke-width=\"1\" marker-end=\"url(#tip)\"/><text x=\"180\" y=\"99\" text-anchor=\"middle\" fill=\"#20399a\" font-size=\"22\">0.840″</text><line x1=\"132.66\" y1=\"218\" x2=\"227.34\" y2=\"218\" stroke=\"#20399a\" stroke-width=\"1\"/><line x1=\"148.86\" y1=\"218\" x2=\"132.66\" y2=\"218\" stroke=\"#20399a\" stroke-width=\"1\" marker-end=\"url(#tip)\"/><line x1=\"211.14\" y1=\"218\" x2=\"227.34\" y2=\"218\" stroke=\"#20399a\" stroke-width=\"1\" marker-end=\"url(#tip)\"/><text x=\"180\" y=\"200\" text-anchor=\"middle\" fill=\"#20399a\" font-size=\"22\">0.526″</text><text x=\"180\" y=\"245\" text-anchor=\"middle\" fill=\"#616771\" font-size=\"17\">ID*</text><path d=\"M284 329V282.10224994260494L224.10224994260497 262.10224994260494\" stroke=\"#20399a\" stroke-width=\"1\" fill=\"none\" marker-end=\"url(#tip)\"/><text x=\"180\" y=\"345\" text-anchor=\"middle\" font-size=\"17\">Wall thickness:</text><text x=\"180\" y=\"369\" text-anchor=\"middle\" font-size=\"19\">a minimum of 0.147″</text><text x=\"540\" y=\"32\" text-anchor=\"middle\" font-size=\"25\" font-weight=\"600\">¾″ · Schedule 80</text><circle cx=\"540\" cy=\"218\" r=\"94.5\" fill=\"url(#wall)\" stroke=\"#262a30\" stroke-width=\"1.5\"/><circle cx=\"540\" cy=\"218\" r=\"64.98\" fill=\"white\" stroke=\"#262a30\" stroke-width=\"1.5\"/><text x=\"540\" y=\"68\" text-anchor=\"middle\" fill=\"#616771\" font-size=\"18\">Outer diameter (OD)</text><line x1=\"445.5\" y1=\"118.5\" x2=\"445.5\" y2=\"101\" stroke=\"#20399a\" stroke-width=\"1\"/><line x1=\"634.5\" y1=\"118.5\" x2=\"634.5\" y2=\"101\" stroke=\"#20399a\" stroke-width=\"1\"/><line x1=\"445.5\" y1=\"111\" x2=\"634.5\" y2=\"111\" stroke=\"#20399a\" stroke-width=\"1\"/><line x1=\"427.5\" y1=\"111\" x2=\"445.5\" y2=\"111\" stroke=\"#20399a\" stroke-width=\"1\" marker-end=\"url(#tip)\"/><line x1=\"652.5\" y1=\"111\" x2=\"634.5\" y2=\"111\" stroke=\"#20399a\" stroke-width=\"1\" marker-end=\"url(#tip)\"/><text x=\"540\" y=\"99\" text-anchor=\"middle\" fill=\"#20399a\" font-size=\"22\">1.050″</text><line x1=\"475.02\" y1=\"218\" x2=\"604.98\" y2=\"218\" stroke=\"#20399a\" stroke-width=\"1\"/><line x1=\"491.22\" y1=\"218\" x2=\"475.02\" y2=\"218\" stroke=\"#20399a\" stroke-width=\"1\" marker-end=\"url(#tip)\"/><line x1=\"588.78\" y1=\"218\" x2=\"604.98\" y2=\"218\" stroke=\"#20399a\" stroke-width=\"1\" marker-end=\"url(#tip)\"/><text x=\"540\" y=\"200\" text-anchor=\"middle\" fill=\"#20399a\" font-size=\"22\">0.722″</text><text x=\"540\" y=\"245\" text-anchor=\"middle\" fill=\"#616771\" font-size=\"17\">ID*</text><path d=\"M644 329V295.0210908348832L597.0210908348832 275.0210908348832\" stroke=\"#20399a\" stroke-width=\"1\" fill=\"none\" marker-end=\"url(#tip)\"/><text x=\"540\" y=\"345\" text-anchor=\"middle\" font-size=\"17\">Wall thickness:</text><text x=\"540\" y=\"369\" text-anchor=\"middle\" font-size=\"19\">a minimum of 0.154″</text><text x=\"360\" y=\"406\" text-anchor=\"middle\" font-size=\"16\" fill=\"#616771\">* Published average inside diameter · actual bore varies</text></g></svg>",
    "download_url": "/agent-v2/diagrams/size-comparison.svg",
    "download_description": "Downloadable SVG image: Two IPS Schedule 80 reference cross sections drawn at the same scale. Left: ½-inch nominal, outside diameter (OD) 0.840 inch, minimum wall thickness 0.147 inch, published average inside diameter (ID) 0.526 inch. Right: ¾-inch nominal, OD 1.050 inches, minimum wall thickness 0.154 inch, published average ID 0.722 inch. GF Harvel S1 reports published average ID and minimum wall as separate catalog values. Do not derive average ID from OD minus twice minimum wall; actual bore varies. The catalog reports these dimensions for both PVC and CPVC Schedule 80 products, not CTS tubing."
  },
  "size-comparison-mobile.svg": {
    "meaning": "Two IPS Schedule 80 reference cross sections drawn at the same scale. Top: ½-inch nominal, outside diameter (OD) 0.840 inch, minimum wall thickness 0.147 inch, published average inside diameter (ID) 0.526 inch. Bottom: ¾-inch nominal, OD 1.050 inches, minimum wall thickness 0.154 inch, published average ID 0.722 inch. GF Harvel S1 reports published average ID and minimum wall as separate catalog values. Do not derive average ID from OD minus twice minimum wall; actual bore varies. The catalog reports these dimensions for both PVC and CPVC Schedule 80 products, not CTS tubing.",
    "labels": [
      "½″ · Schedule 80",
      "Outer diameter (OD)",
      "0.840″",
      "0.526″",
      "Average ID*",
      "Wall thickness:",
      "a minimum of 0.147″",
      "¾″ · Schedule 80",
      "Outer diameter (OD)",
      "1.050″",
      "0.722″",
      "Average ID*",
      "Wall thickness:",
      "a minimum of 0.154″",
      "* Published average inside diameter",
      "Actual bore varies"
    ],
    "specification_context": "Material, nominal size, sizing system and schedule must be stated in a real request; no unspecified stock is assumed. Unless dimensioned above, overall length and length tolerance are unspecified. End A is the left end and end B the right end in side views; they must be specified independently. Quantity is unspecified. Clarify missing dimensions, units, thread designation and acceptance requirements, chamfer angle and explicitly identified axial extent or radial removal, required tolerance, product documents and intended use.",
    "source_refs": [
      "https://www.gfps.com/content/dam/gfps/us/other/archive/gfps-us-brochure-Vinyl-Catalog-and-Tech-Information-2024-en.pdf"
    ],
    "svg": "<svg xmlns=\"http://www.w3.org/2000/svg\" width=\"360\" height=\"825\" viewBox=\"0 0 360 825\" role=\"img\" aria-labelledby=\"title desc\"><title id=\"title\">Half-inch versus three-quarter-inch Schedule 80</title><desc id=\"desc\">Half-inch versus three-quarter-inch Schedule 80. Rings use the same scale, arranged vertically for smaller screens.</desc><defs><marker id=\"tip\" viewBox=\"0 0 10 10\" refX=\"10\" refY=\"5\" markerWidth=\"7\" markerHeight=\"7\" orient=\"auto\"><path d=\"M0 0L10 5L0 10Z\" fill=\"#20399a\"/></marker><pattern id=\"wall\" width=\"7\" height=\"7\" patternUnits=\"userSpaceOnUse\" patternTransform=\"rotate(45)\"><path d=\"M0 0V7\" stroke=\"#9aa0a8\" stroke-width=\".7\"/></pattern><clipPath id=\"detail\"><rect x=\"24\" y=\"50\" width=\"432\" height=\"170\"/></clipPath></defs><rect width=\"360\" height=\"825\" fill=\"white\"/><g font-family=\"Arial, sans-serif\" font-size=\"18\" fill=\"#262a30\"><g transform=\"translate(0 0)\"><text x=\"180\" y=\"32\" text-anchor=\"middle\" font-size=\"25\" font-weight=\"600\">½″ · Schedule 80</text><circle cx=\"180\" cy=\"218\" r=\"75.6\" fill=\"url(#wall)\" stroke=\"#262a30\" stroke-width=\"1.5\"/><circle cx=\"180\" cy=\"218\" r=\"47.34\" fill=\"white\" stroke=\"#262a30\" stroke-width=\"1.5\"/><text x=\"180\" y=\"68\" text-anchor=\"middle\" fill=\"#616771\" font-size=\"18\">Outer diameter (OD)</text><line x1=\"104.4\" y1=\"137.4\" x2=\"104.4\" y2=\"101\" stroke=\"#20399a\" stroke-width=\"1\"/><line x1=\"255.6\" y1=\"137.4\" x2=\"255.6\" y2=\"101\" stroke=\"#20399a\" stroke-width=\"1\"/><line x1=\"104.4\" y1=\"111\" x2=\"255.6\" y2=\"111\" stroke=\"#20399a\" stroke-width=\"1\"/><line x1=\"86.4\" y1=\"111\" x2=\"104.4\" y2=\"111\" stroke=\"#20399a\" stroke-width=\"1\" marker-end=\"url(#tip)\"/><line x1=\"273.6\" y1=\"111\" x2=\"255.6\" y2=\"111\" stroke=\"#20399a\" stroke-width=\"1\" marker-end=\"url(#tip)\"/><text x=\"180\" y=\"99\" text-anchor=\"middle\" fill=\"#20399a\" font-size=\"22\">0.840″</text><line x1=\"132.66\" y1=\"218\" x2=\"227.34\" y2=\"218\" stroke=\"#20399a\" stroke-width=\"1\"/><line x1=\"148.86\" y1=\"218\" x2=\"132.66\" y2=\"218\" stroke=\"#20399a\" stroke-width=\"1\" marker-end=\"url(#tip)\"/><line x1=\"211.14\" y1=\"218\" x2=\"227.34\" y2=\"218\" stroke=\"#20399a\" stroke-width=\"1\" marker-end=\"url(#tip)\"/><text x=\"180\" y=\"200\" text-anchor=\"middle\" fill=\"#20399a\" font-size=\"22\">0.526″</text><text x=\"180\" y=\"245\" text-anchor=\"middle\" fill=\"#616771\" font-size=\"17\">ID*</text><path d=\"M284 329V282.10224994260494L224.10224994260497 262.10224994260494\" stroke=\"#20399a\" stroke-width=\"1\" fill=\"none\" marker-end=\"url(#tip)\"/><text x=\"180\" y=\"345\" text-anchor=\"middle\" font-size=\"17\">Wall thickness:</text><text x=\"180\" y=\"369\" text-anchor=\"middle\" font-size=\"19\">a minimum of 0.147″</text></g><g transform=\"translate(-360 390)\"><text x=\"540\" y=\"32\" text-anchor=\"middle\" font-size=\"25\" font-weight=\"600\">¾″ · Schedule 80</text><circle cx=\"540\" cy=\"218\" r=\"94.5\" fill=\"url(#wall)\" stroke=\"#262a30\" stroke-width=\"1.5\"/><circle cx=\"540\" cy=\"218\" r=\"64.98\" fill=\"white\" stroke=\"#262a30\" stroke-width=\"1.5\"/><text x=\"540\" y=\"68\" text-anchor=\"middle\" fill=\"#616771\" font-size=\"18\">Outer diameter (OD)</text><line x1=\"445.5\" y1=\"118.5\" x2=\"445.5\" y2=\"101\" stroke=\"#20399a\" stroke-width=\"1\"/><line x1=\"634.5\" y1=\"118.5\" x2=\"634.5\" y2=\"101\" stroke=\"#20399a\" stroke-width=\"1\"/><line x1=\"445.5\" y1=\"111\" x2=\"634.5\" y2=\"111\" stroke=\"#20399a\" stroke-width=\"1\"/><line x1=\"427.5\" y1=\"111\" x2=\"445.5\" y2=\"111\" stroke=\"#20399a\" stroke-width=\"1\" marker-end=\"url(#tip)\"/><line x1=\"652.5\" y1=\"111\" x2=\"634.5\" y2=\"111\" stroke=\"#20399a\" stroke-width=\"1\" marker-end=\"url(#tip)\"/><text x=\"540\" y=\"99\" text-anchor=\"middle\" fill=\"#20399a\" font-size=\"22\">1.050″</text><line x1=\"475.02\" y1=\"218\" x2=\"604.98\" y2=\"218\" stroke=\"#20399a\" stroke-width=\"1\"/><line x1=\"491.22\" y1=\"218\" x2=\"475.02\" y2=\"218\" stroke=\"#20399a\" stroke-width=\"1\" marker-end=\"url(#tip)\"/><line x1=\"588.78\" y1=\"218\" x2=\"604.98\" y2=\"218\" stroke=\"#20399a\" stroke-width=\"1\" marker-end=\"url(#tip)\"/><text x=\"540\" y=\"200\" text-anchor=\"middle\" fill=\"#20399a\" font-size=\"22\">0.722″</text><text x=\"540\" y=\"245\" text-anchor=\"middle\" fill=\"#616771\" font-size=\"17\">ID*</text><path d=\"M644 329V295.0210908348832L597.0210908348832 275.0210908348832\" stroke=\"#20399a\" stroke-width=\"1\" fill=\"none\" marker-end=\"url(#tip)\"/><text x=\"540\" y=\"345\" text-anchor=\"middle\" font-size=\"17\">Wall thickness:</text><text x=\"540\" y=\"369\" text-anchor=\"middle\" font-size=\"19\">a minimum of 0.154″</text></g><text x=\"180\" y=\"786\" text-anchor=\"middle\" font-size=\"16\" fill=\"#616771\">* Published average inside diameter</text><text x=\"180\" y=\"808\" text-anchor=\"middle\" font-size=\"16\" fill=\"#616771\">Actual bore varies</text></g></svg>",
    "download_url": "/agent-v2/diagrams/size-comparison-mobile.svg",
    "download_description": "Downloadable SVG image: Two IPS Schedule 80 reference cross sections drawn at the same scale. Top: ½-inch nominal, outside diameter (OD) 0.840 inch, minimum wall thickness 0.147 inch, published average inside diameter (ID) 0.526 inch. Bottom: ¾-inch nominal, OD 1.050 inches, minimum wall thickness 0.154 inch, published average ID 0.722 inch. GF Harvel S1 reports published average ID and minimum wall as separate catalog values. Do not derive average ID from OD minus twice minimum wall; actual bore varies. The catalog reports these dimensions for both PVC and CPVC Schedule 80 products, not CTS tubing."
  }
}
