# Recorded pipe specification

V2 (fact-checked from V1)

Validates the structure of a recorded request only. Passing does not establish dimensional consistency, compatibility, threadability, completeness, pressure rating or manufacturability. Preserve contradictory requests and clarify them, never silently correct them. Null means not supplied. Flag CPVC + CTS + Schedule 80 + male NPT while preserving all four requested values.

## Ten plain-end PVC pieces

Request: Ten pieces of half-inch nominal IPS Schedule 80 PVC, each 6 inches finished end-to-end, square cut at both ends, required length tolerance ±1/32 inch.

```json
{
  "material": "PVC",
  "nominal_size": "1/2 in",
  "sizing_system": "IPS",
  "actual_od_requirement": null,
  "schedule": "80",
  "finished_length": {
    "value": 6,
    "unit": "in"
  },
  "required_tolerance": {
    "plus_minus": 0.03125,
    "unit": "in"
  },
  "end_a": "square_cut",
  "end_b": "square_cut",
  "quantity": 10,
  "in_research_scope": true,
  "clarifications": [
    "Confirm stock technical sheet, intended application and achievable tolerance before sourcing.",
    "The example states a requested tolerance; confirm that the selected process can meet it.",
    "Ask for conveyed substance, concentration, operating temperature and pressure; no material is selected from a vague application label.",
    "Schema success records structure only, not completeness, suitability or manufacturability."
  ],
  "source_refs": [
    "https://www.gfps.com/content/dam/gfps/us/other/archive/gfps-us-brochure-Vinyl-Catalog-and-Tech-Information-2024-en.pdf"
  ],
  "original_request": "Ten pieces of half-inch nominal IPS Schedule 80 PVC, each 6 inches finished end-to-end, square cut at both ends, required length tolerance ±1/32 inch.",
  "sdr": null,
  "application": null
}
```
